How to Unbrick a Hard Bricked Galaxy S2 using a SD card (Without JTAG) <div id="body" style="background-color: #e6e6e6; border-radius: 25px; border: 11px solid rgb(207, 207, 207); color: #333333; font-family: Arial, sans-serif; line-height: 18.2px; margin: 10px 0px; padding: 10px 15px; text-align: left; vertical-align: baseline;"><div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEibayv2FEOlNcHR3KuNi5pAIva9XydXXf2eM0w2KTs8EtRcJYZhVdEqM_GClYLMVdPmIMz97OavwPiKfYI-n_HyEsYGoi271ewT1SsjAq39I7Psd2XlQM6welSRZWgQUvRNZtuzvQp6IHUz/s1600/banner_GalaxySBricked+(1).jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="232" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEibayv2FEOlNcHR3KuNi5pAIva9XydXXf2eM0w2KTs8EtRcJYZhVdEqM_GClYLMVdPmIMz97OavwPiKfYI-n_HyEsYGoi271ewT1SsjAq39I7Psd2XlQM6welSRZWgQUvRNZtuzvQp6IHUz/s1600/banner_GalaxySBricked+(1).jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;"><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong></strong></u></span><span style="font-family: Verdana, sans-serif;"></span> </div><div class="separator" style="clear: both; text-align: center;"> <span style="color: #3d85c6;">How to Repair Galaxy S2 bootloader Without JTAG</span> </div><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;">Bricking an android phone is nothing new, people having interest in trying new things </span><span style="font-family: Verdana, sans-serif;">with android devices some times end up with bricked phones, main cause may be an </span><span style="font-family: Verdana, sans-serif;">attempt to root and install custom recovery or may be a custom rom</span><span style="font-family: Verdana, sans-serif;">. Even interruption during flashing a stock rom via odin can cause this issue, some one may accidently check the re-partition option with corrupt firmware and the result will be a bricked phone.</span><br /><span style="font-family: Verdana, sans-serif;">bricking is of two types:</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 1) soft bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 2)hard bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> It is quite easy to revive a phone from soft bricked stage when its bootloader is intact </span><span style="font-family: Verdana, sans-serif;">but recovery of phone from hard bricked or deadboot stage is very difficult and it may </span><span style="font-family: Verdana, sans-serif;">require to open up the phone for a JTAG service. This will cause lost of mobile value in </span><span style="font-family: Verdana, sans-serif;">many countries and it is also expensive and time taking procedure.</span> Hard brick may also scare many people from customizations of their android devices.<br /><br />Repairing deadboot from SD card is simple and easy, and if it works you will end up wasting nothing but some time. The SD card that you bought will add up to your extra memory and you will feel free to experiment with your device as you have a quick boot repair recipe.<br /><br />Even if it doesn't work you still own the extra memory that you bought and you can get your device repaired by JTAG service.<br /><br /><span style="color: #3d85c6;">Note: This method is not confirmed so if some one succeeds please post in the comment, I followed XDA Guide to make debrick image as if it may help some one.</span><br /><strong><u><span style="color: #6aa84f; font-family: Verdana; font-size: large;"></span></u></strong><br /><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong>Requirements:</strong></u></span></div><ol><li><span style="font-family: Verdana, sans-serif;">16 GB SD Card (must be class 10 or better with same capacity as your phone).</span></li><li><span style="font-family: Verdana, sans-serif;"> Hard bricked Galaxy S2 GT-I9100.</span></li><li><span style="font-family: Verdana, sans-serif;">USB cord and </span><a href="http://www.linkbucks.com/8mni" rel="nofollow" target="_blank"><strong><span style="color: #3d85c6; font-family: Verdana, sans-serif;">Drivers</span></strong></a><span style="font-family: Verdana, sans-serif;">.</span></li><li><span style="font-family: Verdana, sans-serif;">A Linux/Windows dual boot computer (Or go use a Linux Live CD).</span></li><li><span style="font-family: Verdana, sans-serif;"><a href="http://www.linkbucks.com/BNly" rel="nofollow" target="_blank"><strong>Stock tar</strong></a> for ODIN.</span></li><li><span style="color: #0b5394; font-family: Verdana, sans-serif;"><strong><a href="http://www.linkbucks.com/BNMj" rel="nofollow" target="_blank">Download</a></strong></span><span style="font-family: Verdana, sans-serif;"> <strong>the </strong><a href="http://www.linkbucks.com/BPDw" rel="nofollow" target="_blank"><strong>debrick image</strong></a>.</span></li><span style="font-family: Verdana;"></span> </ol><div><span style="color: #45818e; font-family: Verdana, sans-serif;"></span> </div><div><span style="font-family: Verdana, sans-serif;"></span><br /></div><div><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><strong><u>Procedure:</u></strong></span></div><div><span style="font-family: Verdana, sans-serif;"></span> </div><div><span style="font-family: Verdana, sans-serif;"> Assuming that you are already on a Linux machine, here's what you need to do. </span></div><div><span style="font-family: Verdana, sans-serif;"></span><br /></div><ol><li><span style="font-family: Verdana, sans-serif;">Format card to FAT32 using windows GUI or 'format x: at the command prompt ( substitute 'x' with your SD card letter). </span></li><li><span style="font-family: Verdana, sans-serif;"><span style="color: red;">Make sure you have no external USB/HDDs attached to your machine</span>. Insert your SD card to a reader. You will need to identify the letter of the SD card. You can do that by opening up Terminal and enter the following</span></li></ol><span style="font-family: Verdana, sans-serif;"></span><br /><div style="margin: 0px 0px 10px;"><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">>Sudo su<br /> (Enter your password here)<br />>dmesg | tail </span></td></tr></tbody></table></div><br /><br /><span style="font-family: Verdana, sans-serif;"> Or go use GParted (Just look for it in the Applications drawer in Ubuntu) for an easier method.<br /><br /> 2. Unzip the s3 unbrick file on to your desktop. Now go back to the Terminal. You should still have root privileges so there is no need to enter "Sudo Su" again. Enter the following.<br /><b><u><span style="color: red;"> WARNING: THIS WILL ERASE THE ENTIRE SD CARD.</span></u></b></span><br /><div style="margin: 0px 0px 10px;"><div class="smallfont" style="margin-bottom: 2px;"><span style="font-family: Verdana, sans-serif;">This should write the img file to the SD.</span></div><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">dd if=[drag the unzipped unbrick img onto the terminal] of=/dev/sd[your card letter] </span></td></tr></tbody></table></div><span style="font-family: Verdana, sans-serif;"><span style="color: red; font-size: large;"><strong>Note:</strong></span> You only need to use the part that says "sd[your card letter]". That is the your SD card's letter. <span style="color: red;">DO NOT USE THE ONE THAT HAS THE NUMBER</span>. For example: sdc1 <<< That is a partition of the SD card, not the actual root of the SD card itself. If you use the wrong letter, YOU COULD WIPE YOUR HARD DRIVE.<br /><br /> 3. After it's done writing the img, take out your SD card and put it into your phone. With the battery in the phone, insert the SD card, plug the phone into your machine, and try to boot to DL mode via the usual method. This WILL take several tries and possibly rewriting the img file to SD card again to work.<br /><br /> 4. If you were lucky enough to boot to DL mode, boot back to Windows and </span><span style="font-family: Verdana, sans-serif;"><span style="color: #6aa84f;"><a href="http://www.linkbucks.com/8mLa" rel="nofollow" target="_blank">ODIN</a></span> yourself back to stock.</span> <br /><br /><span style="color: #0b5394;">If everything fails, try new/another USB cable, different USB port and lastly, try using another computer to exclude antivirus/software or hardware problems.</span><br /><br /><span style="color: #e06666;">If you have another rooted Samsung phone kindly create its Dbrick img and post its link to help the others</span><br /><span style="color: #e06666;"> </span><br /><span style="color: #6aa84f; font-size: large;"><strong><u>Use this procedure to create the image</u></strong></span><br /><strong><u><span style="color: #6aa84f; font-size: large;"></span></u></strong><br /><ol><li><span style="color: black;">Enable USB Debugging.</span></li><li><span style="color: black;">Open cmd and navigate to your adb folder.</span></li><li><span style="color: black;">Run adb shell</span></li><li>Now type 'SU' to enable superuser, your may have to grant access to ADB from a popup screen of your phone's superuser app</li><li>next copy and paste the following code and change the phone model to your phone i.e. <span style="color: #999999;">dd if=/dev/block/mmcblk0 of=/sdcard/debrickI710-16GB.img bs=1M count=128</span> </li></ol><span style="color: black;"> </span><span style="color: #3d85c6;">dd if=/dev/block/mmcblk0 of=/sdcard/debrick[phonemodel-memorysize].img bs=1M count=128</span><br /> <br /> 6. Now type Exit on cmd and then use following the command to copy this image to your adb folder <br /> <span style="color: #3d85c6;">adb pull /sdcard/debrick[phonemodel-memorysize].img </span><br /><span style="color: #3d85c6;"></span><br /> 7. upload the image and share its link here.<br /><br /><br />After writing the files on sd plug the card into a computer, and check that the partitions contain the right data. The first 128MB should contain the various bootloader stages, firmware, download mode, recovery and boot images, but if not, you can always copy the relevant files from an ODIN package to the right partition on the card.</div> How to Unbrick a Hard Bricked Galaxy S2 using a SD card (Without JTAG)… Read more » 27 Sep 2014
How to Unbrick a Hard Bricked Galaxy Note Korean SHV-E160K using an SD card (Without JTAG) <div id="body" style="background-color: #e6e6e6; border-radius: 25px; border: 11px solid rgb(207, 207, 207); color: #333333; font-family: Arial, sans-serif; line-height: 18.2px; margin: 10px 0px; padding: 10px 15px; text-align: left; vertical-align: baseline;"><div><div class="separator" style="clear: both; text-align: center;"><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong></strong></u></span><span style="font-family: Verdana, sans-serif;"></span> </div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="225" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" style="cursor: move;" unselectable="on" width="320" /></a></div><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;">Bricking an android phone is nothing new, people having interest in trying new things </span><span style="font-family: Verdana, sans-serif;">with android devices some times end up with bricked phones, main cause may be an </span><span style="font-family: Verdana, sans-serif;">attempt to root and install custom recovery or may be a custom rom</span><span style="font-family: Verdana, sans-serif;">. Even interruption during flashing a stock rom via odin can cause this issue, some one may accidently check the re-partition option with corrupt firmware and the result will be a bricked phone.</span><br /><span style="font-family: Verdana, sans-serif;">bricking is of two types:</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 1) soft bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 2)hard bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> It is quite easy to revive a phone from soft bricked stage when its bootloader is intact </span><span style="font-family: Verdana, sans-serif;">but recovery of phone from hard bricked or deadboot stage is very difficult and it may </span><span style="font-family: Verdana, sans-serif;">require to open up the phone for a JTAG service. This will cause lost of mobile value in </span><span style="font-family: Verdana, sans-serif;">many countries and it is also expensive and time taking procedure.</span> Hard brick may also scare many people from customizations of their android devices.<br /><br />Repairing deadboot from SD card is simple and easy, and if it works you will end up wasting nothing but some time. The SD card that you bought will add up to your extra memory and you will feel free to experiment with your device as you have a quick boot repair recipe.<br /><br />Even if it doesn't work you still own the extra memory that you bought and you can get your device repaired by JTAG service.<br /><br /><span style="color: #3d85c6;">Note: I couldn't try this method as when my Note was dead I didn't have the image, so I had to pay for JTAG :/ that's why I followed XDA Guide to make debrick image as if it may help some one else.</span><br /><strong><u><span style="color: #6aa84f; font-family: Verdana; font-size: large;"></span></u></strong><br /><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong>Requirements:</strong></u></span></div><ol><li><span style="font-family: Verdana, sans-serif;"> 32 GB SD Card (must be class 10 or better with same capacity as your phone).</span></li><li><span style="font-family: Verdana, sans-serif;"> Hard bricked Galaxy Note1 SHV-E160K.</span></li><li><span style="font-family: Verdana, sans-serif;">USB cord and </span><a href="http://www.linkbucks.com/8mni" rel="nofollow" target="_blank"><strong><span style="color: #3d85c6; font-family: Verdana, sans-serif;">Drivers</span></strong></a><span style="font-family: Verdana, sans-serif;">.</span></li><li><span style="font-family: Verdana, sans-serif;">A Linux/Windows dual boot computer (Or go use a Linux Live CD).</span></li><li><span style="font-family: Verdana, sans-serif;"><a href="http://www.linkbucks.com/BM32" rel="nofollow" target="_blank"><strong>Stock tar</strong></a> for ODIN.</span></li><li><span style="color: #0b5394; font-family: Verdana, sans-serif;"><strong><a href="http://www.linkbucks.com/BMz6" rel="nofollow" target="_blank">Download</a></strong></span><span style="font-family: Verdana, sans-serif;"> the debrick image.</span></li><span style="font-family: Verdana;"></span> </ol><div><span style="color: #45818e; font-family: Verdana, sans-serif;"></span> </div><div><span style="font-family: Verdana, sans-serif;"></span><br /></div><div><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><strong><u>Procedure:</u></strong></span></div><div><span style="font-family: Verdana, sans-serif;"></span> </div><div><span style="font-family: Verdana, sans-serif;"> Assuming that you are already on a Linux machine, here's what you need to do. </span></div><div><span style="font-family: Verdana, sans-serif;"></span><br /></div><ol><li><span style="font-family: Verdana, sans-serif;">Format card to FAT32 using windows GUI or 'format x: at the command prompt ( substitute 'x' with your SD card letter). </span></li><li><span style="font-family: Verdana, sans-serif;"><span style="color: red;">Make sure you have no external USB/HDDs attached to your machine</span>. Insert your SD card to a reader. You will need to identify the letter of the SD card. You can do that by opening up Terminal and enter the following</span></li></ol><span style="font-family: Verdana, sans-serif;"></span><br /><div style="margin: 0px 0px 10px;"><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">>Sudo su<br /> (Enter your password here)<br />>dmesg | tail </span></td></tr></tbody></table></div><br /><br /><span style="font-family: Verdana, sans-serif;"> Or go use GParted (Just look for it in the Applications drawer in Ubuntu) for an easier method.<br /><br /> 2. Unzip the s3 unbrick file on to your desktop. Now go back to the Terminal. You should still have root privileges so there is no need to enter "Sudo Su" again. Enter the following.<br /><b><u><span style="color: red;"> WARNING: THIS WILL ERASE THE ENTIRE SD CARD.</span></u></b></span><br /><div style="margin: 0px 0px 10px;"><div class="smallfont" style="margin-bottom: 2px;"><span style="font-family: Verdana, sans-serif;">This should write the img file to the SD.</span></div><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">dd if=[drag the unzipped unbrick img onto the terminal] of=/dev/sd[your card letter] </span></td></tr></tbody></table></div><span style="font-family: Verdana, sans-serif;"><span style="color: red; font-size: large;"><strong>Note:</strong></span> You only need to use the part that says "sd[your card letter]". That is the your SD card's letter. <span style="color: red;">DO NOT USE THE ONE THAT HAS THE NUMBER</span>. For example: sdc1 <<< That is a partition of the SD card, not the actual root of the SD card itself. If you use the wrong letter, YOU COULD WIPE YOUR HARD DRIVE.<br /><br /> 3. After it's done writing the img, take out your SD card and put it into your phone. With the battery in the phone, insert the SD card, plug the phone into your machine, and try to boot to DL mode via the usual method. This WILL take several tries and possibly rewriting the img file to SD card again to work.<br /><br /> 4. If you were lucky enough to boot to DL mode, boot back to Windows and </span><span style="font-family: Verdana, sans-serif;"><span style="color: #6aa84f;"><a href="http://www.linkbucks.com/8mLa" rel="nofollow" target="_blank">ODIN</a></span> yourself back to stock.</span> <br /><br /><span style="color: #0b5394;">If everything fails, try new/another USB cable, different USB port and lastly, try using another computer to exclude antivirus/software or hardware problems.</span><br /><br /><span style="color: #e06666;">If you have another rooted Samsung phone kindly create its Dbrick img and post its link to help the others</span><br /><span style="color: #e06666;"> </span><br /><span style="color: #6aa84f; font-size: large;"><strong><u>Use this procedure to create the image</u></strong></span><br /><strong><u><span style="color: #6aa84f; font-size: large;"></span></u></strong><br /><ol><li><span style="color: black;">Enable USB Debugging.</span></li><li><span style="color: black;">Open cmd and navigate to your adb folder.</span></li><li><span style="color: black;">Run adb shell</span></li><li>Now type 'SU' to enable superuser, your may have to grant access to ADB from a popup screen of your phone's superuser app</li><li>next copy and paste the following code and change the phone model to your phone i.e. <span style="color: #999999;">dd if=/dev/block/mmcblk0 of=/sdcard/debrickI710-16GB.img bs=1M count=128</span> </li></ol><span style="color: black;"> </span><span style="color: #3d85c6;">dd if=/dev/block/mmcblk0 of=/sdcard/debrick[phonemodel-memorysize].img bs=1M count=128</span><br /> <br /> 6. Now type Exit on cmd and then use following the command to copy this image to your adb folder <br /> <span style="color: #3d85c6;">adb pull /sdcard/debrick[phonemodel-memorysize].img </span><br /><span style="color: #3d85c6;"></span><br /> 7. upload the image and share its link here.<br /><br /><br />After writing the files on sd plug the card into a computer, and check that the partitions contain the right data. The first 128MB should contain the various bootloader stages, firmware, download mode, recovery and boot images, but if not, you can always copy the relevant files from an ODIN package to the right partition on the card.</div><img height="67" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" style="left: 135.23px; opacity: 0.3; position: absolute; top: 100.95px;" width="96" /><br /><br /><!-- Blogger automated replacement: "https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" with "https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" --><!-- Blogger automated replacement: "https://images-blogger-opensocial.googleusercontent.com/gadgets/proxy?url=http%3A%2F%2F1.bp.blogspot.com%2F-gkrblfFVxLc%2FVCQrwBnHWTI%2FAAAAAAAAAHw%2FHEcz6zrF24s%2Fs1600%2Fsamsung_shv-e160s_galaxy_note.jpg&container=blogger&gadget=a&rewriteMime=image%2F*" with "https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEij9sIuzl4lXuYfDqvu6DDJJ77q1Y1EALUkcjclDJggbUwX60in1zgDNUKwtOjDS7g8SmQlwFTL_XxrEpR743h3EKNR39-5N7GFGwlnNYpiZjxGTDpekPubum4bd4LAItG5bFckwFYuWdZs/s1600/samsung_shv-e160s_galaxy_note.jpg" --> How to Unbrick a Hard Bricked Galaxy Note Korean SHV-E160K using an SD card (Without JTAG)… Read more » 25 Sep 2014
How to Unbrick a Hard Bricked Galaxy S3 using an SD card (Without JTAG)/ How to Repair Galaxy S3 bootloader Without JTAG <div id="body" style="background-color: #e6e6e6; border-radius: 25px; border: 11px solid rgb(207, 207, 207); color: #333333; font-family: Arial, sans-serif; line-height: 18.2px; margin: 10px 0px; padding: 10px 15px; text-align: left; vertical-align: baseline;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigBVbOClVcxVhSBjvJE_vrirpB7_w4q6dgrvvBd25teUA4TNfLdv8E5pFiQ7Te_73BjIRNYVSnd7Oufba-sJJMTxXbBsTbiXvRW8U4ybKHXltC2ryIdVMlyziIFbv_J29qoQXLAGIhY2b_/s1600/main.jpg" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="158" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEigBVbOClVcxVhSBjvJE_vrirpB7_w4q6dgrvvBd25teUA4TNfLdv8E5pFiQ7Te_73BjIRNYVSnd7Oufba-sJJMTxXbBsTbiXvRW8U4ybKHXltC2ryIdVMlyziIFbv_J29qoQXLAGIhY2b_/s1600/main.jpg" width="320" /></a><br /><div><div class="separator" style="clear: both; text-align: center;"><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong></strong></u></span><span style="font-family: Verdana, sans-serif;"></span> </div><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;">Bricking an android phone is nothing new, people having interest in trying new things </span><span style="font-family: Verdana, sans-serif;">with android devices some times end up with bricked phones, main cause may be an </span><span style="font-family: Verdana, sans-serif;">attempt to root and install custom recovery or may be a custom rom</span><span style="font-family: Verdana, sans-serif;">. Even interruption during flashing a stock rom via odin can cause this issue, some one may accidently check the re-partition option with corrupt firmware and the result will be a bricked phone.</span><br /><span style="font-family: Verdana, sans-serif;">bricking is of two types:</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 1) soft bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> 2)hard bricked.</span><br /><span style="font-family: Verdana, sans-serif;"></span><br /><span style="font-family: Verdana, sans-serif;"> It is quite easy to revive a phone from soft bricked stage when its bootloader is intact </span><span style="font-family: Verdana, sans-serif;">but recovery of phone from hard bricked or deadboot stage is very difficult and it may </span><span style="font-family: Verdana, sans-serif;">require to open up the phone for a JTAG service. This will cause lost of mobile value in </span><span style="font-family: Verdana, sans-serif;">many countries and it is also expensive and time taking procedure.</span> Hard brick may also scare many people from customizations of their android devices.<br /><br />Repairing deadboot from SD card is simple and easy, and if it works you will end up wasting nothing but some time. The SD card that you bought will add up to your extra memory and you will feel free to experiment with your device as you have a quick boot repair recipe.<br /><br />Even if it doesn't work you still own the extra memory that you bought and you can get your device repaired by JTAG service.<br /><br /><strong><u><span style="color: #6aa84f; font-family: Verdana; font-size: large;"></span></u></strong><br /><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><u><strong>Requirements:</strong></u></span></div><ol><li><span style="font-family: Verdana, sans-serif;"> 16 GB SD Card (must be class 10 or better with same capacity as your phone).</span></li><li><span style="font-family: Verdana, sans-serif;"> Hard bricked S3.</span></li><li><span style="font-family: Verdana, sans-serif;">USB cord and </span><a href="http://www.linkbucks.com/8mni" rel="nofollow" target="_blank"><strong><span style="color: #3d85c6; font-family: Verdana, sans-serif;">Drivers</span></strong></a><span style="font-family: Verdana, sans-serif;">.</span></li><li><span style="font-family: Verdana, sans-serif;">A Linux/Windows dual boot computer (Or go use a Linux Live CD).</span></li><li><span style="font-family: Verdana, sans-serif;">Stock tar for ODIN.</span></li><li><span style="color: #0b5394; font-family: Verdana, sans-serif;"><strong><a href="http://www.linkbucks.com/BHd3" rel="nofollow" target="_blank">Download</a></strong></span><span style="font-family: Verdana, sans-serif;"> the debrick image, this image is of Sprint Version(I710).</span></li><li><span style="color: #0b5394; font-family: Verdana, sans-serif;"><strong><a href="http://www.linkbucks.com/BMEw" rel="nofollow" target="_blank">Download</a></strong></span><span style="font-family: Verdana, sans-serif;"> the debrick image, this image is of at&t Version(I747).</span></li><span style="font-family: Verdana;"></span></ol><div><span style="color: #45818e; font-family: Verdana, sans-serif;">Note: This was all done on Ubuntu 12.04 LTS and you will need to be familiar with Terminal and its processes.</span></div><div><span style="font-family: Verdana, sans-serif;"> </span></div><div><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><strong><u>Procedure:</u></strong></span></div><div><span style="font-family: Verdana, sans-serif;"></span> </div><div><span style="font-family: Verdana, sans-serif;"> Assuming that you are already on a Linux machine, here's what you need to do. </span></div><div><span style="font-family: Verdana, sans-serif;"></span><br /></div><ol><li><span style="font-family: Verdana, sans-serif;">Format card to FAT32 using windows GUI or 'format x: at the command prompt ( substitute 'x' with your SD card letter). </span></li><li><span style="font-family: Verdana, sans-serif;"><span style="color: red;">Make sure you have no external USB/HDDs attached to your machine</span>. Insert your SD card to a reader. You will need to identify the letter of the SD card. You can do that by opening up Terminal and enter the following</span></li></ol><span style="font-family: Verdana, sans-serif;"></span><br /><div style="margin: 0px 0px 10px;"><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">>Sudo su<br /> (Enter your password here)<br />>dmesg | tail </span></td></tr></tbody></table></div><br /><br /><span style="font-family: Verdana, sans-serif;"> Or go use GParted (Just look for it in the Applications drawer in Ubuntu) for an easier method.<br /><br /> 2. Unzip the s3 unbrick file on to your desktop. Now go back to the Terminal. You should still have root privileges so there is no need to enter "Sudo Su" again. Enter the following.<br /><b><u><span style="color: red;"> WARNING: THIS WILL ERASE THE ENTIRE SD CARD.</span></u></b></span><br /><div style="margin: 0px 0px 10px;"><div class="smallfont" style="margin-bottom: 2px;"><span style="font-family: Verdana, sans-serif;">This should write the img file to the SD.</span></div><table border="0" cellpadding="6" cellspacing="0"><tbody><tr><td class="alt2" style="background-color: #e9e9e9; border-radius: 3px; border: 1px solid rgb(180, 180, 180); padding: 10px;"><span style="font-family: Verdana, sans-serif;">dd if=[drag the unzipped unbrick img onto the terminal] of=/dev/sd[your card letter] </span></td></tr></tbody></table></div><span style="font-family: Verdana, sans-serif;"><span style="color: red; font-size: large;"><strong>Note:</strong></span> You only need to use the part that says "sd[your card letter]". That is the your SD card's letter. <span style="color: red;">DO NOT USE THE ONE THAT HAS THE NUMBER</span>. For example: sdc1 <<< That is a partition of the SD card, not the actual root of the SD card itself. If you use the wrong letter, YOU COULD WIPE YOUR HARD DRIVE.<br /><br /> 3. After it's done writing the img, take out your SD card and put it into your phone. With the battery in the phone, insert the SD card, plug the phone into your machine, and try to boot to DL mode via the usual method. This WILL take several tries and possibly rewriting the img file to SD card again to work.<br /><br /> 4. If you were lucky enough to boot to DL mode, boot back to Windows and then I suggest you go and download a <span style="color: #6aa84f;"><strong>S</strong></span></span><span style="color: #6aa84f; font-family: Verdana, sans-serif; font-size: large;"><strong><span style="font-size: small;">tock MD4</span> <span style="font-size: small;"> tar</span></strong></span><span style="font-family: Verdana, sans-serif;"> (<a href="http://www.linkbucks.com/BH9U" rel="nofollow" target="_blank"><strong>Sprint L710</strong></a> or <a href="http://www.linkbucks.com/BMQk" rel="nofollow" target="_blank"><strong>At&t I747</strong></a>) file and <span style="color: #6aa84f;"><a href="http://www.linkbucks.com/8mLa" rel="nofollow" target="_blank">ODIN</a></span> yourself back to stock.</span> <br /><br /><span style="color: #0b5394;">If everything fails, try new/another USB cable, different USB port and lastly, try using another computer to exclude antivirus/software or hardware problems.</span><br /><br /><span style="color: #e06666;">If you have another rooted Samsung phone kindly create its Dbrick img and post its link to help the others</span><br /><span style="color: #e06666;"> </span><br /><span style="color: #6aa84f; font-size: large;"><strong><u>Use this procedure to create the image</u></strong></span><br /><strong><u><span style="color: #6aa84f; font-size: large;"></span></u></strong><br /><ol><li><span style="color: black;">Enable USB Debugging.</span></li><li><span style="color: black;">Open cmd and navigate to your adb folder.</span></li><li><span style="color: black;">Run adb shell</span></li><li>Now type 'SU' to enable superuser, your may have to grant access to ADB from a popup screen of your phone's superuser app</li><li>next copy and paste the following code and change the phone model to your phone i.e. <span style="color: #999999;">dd if=/dev/block/mmcblk0 of=/sdcard/debrickI710-16GB.img bs=1M count=128</span> </li></ol><span style="color: black;"> </span><span style="color: #3d85c6;">dd if=/dev/block/mmcblk0 of=/sdcard/debrick[phonemodel-memorysize].img bs=1M count=128</span><br /> <br /> 6. Now type Exit on cmd and then use following the command to copy this image to your adb folder <br /> <span style="color: #3d85c6;">adb pull /sdcard/debrick[phonemodel-memorysize].img </span><br /><span style="color: #3d85c6;"></span><br /> 7. upload the image and share its link here.<br /><br /><br />After writing the files on sd plug the card into a computer, and check that the partitions contain the right data. The first 128MB should contain the various bootloader stages, firmware, download mode, recovery and boot images, but if not, you can always copy the relevant files from an ODIN package to the right partition on the card.</div> How to Unbrick a Hard Bricked Galaxy S3 using an SD card (Without JTAG)/ How to Repair Galaxy S3 bootloader Without JTAG… Read more » 25 Sep 2014
how to boot your Samsung Galaxy S4 into Stock / CWM / TWRP Recovery Mode <h2><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgva-uS5GQzKkxjV0t2aQvlmV-59UWhQqJRVGtZsKNPEw36lcXe8U5ASwkD2hVqRgTI8ygYO_daDnkcPQBbICgto-hZysCi8V07qgf2nb2wFWnc1eGhLymyvZi_t7koshMwGY_h6LcZXswO/s1600/recovery-mode-option.jpg" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img border="0" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgva-uS5GQzKkxjV0t2aQvlmV-59UWhQqJRVGtZsKNPEw36lcXe8U5ASwkD2hVqRgTI8ygYO_daDnkcPQBbICgto-hZysCi8V07qgf2nb2wFWnc1eGhLymyvZi_t7koshMwGY_h6LcZXswO/s1600/recovery-mode-option.jpg" width="640" /></a><span style="color: #6aa84f;"></span></h2><h2><span style="color: #6aa84f;">Here’s how to boot your Samsung Galaxy S4 into Stock / CWM / TWRP Recovery Mode:</span></h2><ul><li><span style="line-height: 13px;"><span style="color: #3d85c6; font-size: large;">Power off your device completely.</span></span></li><li><span style="color: #3d85c6; font-size: large;">Press and hold Volume Up, Home and Power buttons simultaneously.</span></li><li><span style="color: #3d85c6; font-size: large;">Release the buttons when the phone’s screen flickers or the Stock / CWM / TWRP Recovery logo appears.</span></li><li><span style="color: #3d85c6; font-size: large;">That is it, after you release buttons, you will be taken to the main Recovery Mode menu.</span></li><li><span style="color: #3d85c6; font-size: large;">Use its settings to apply any tasks you wish in order to improve your Galaxy S4 operating system.</span></li><li><span style="color: #3d85c6; font-size: large;">To reboot back to normal Galaxy S4 mode, you need to return to the first Recovery screen and select ‘reboot system’.</span></li></ul><span style="font-size: large;">That’s it, booting into Recovery Mode for Samsung Galaxy S4 is easy.</span> how to boot your Samsung Galaxy S4 into Stock / CWM / TWRP Recovery Mode… Read more » 25 Sep 2014
How to enable Developer Options on Android 4.x <h2><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgCn1R1OMQMQXCVkQjd4tXStyLlzq0yKSRad6_HG4U-N3JTT5QPBEDSCunjAY1vmFr6VMlD6D1Q_iTKngNzzHJuAoToxWSfFKNMJhTmEdwSMdq3_VakYz-IAt_uyUJfMGaxzlDbktrS6CqN/s1600/Enable-Developer-Options-on-Android-4.2.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="181" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgCn1R1OMQMQXCVkQjd4tXStyLlzq0yKSRad6_HG4U-N3JTT5QPBEDSCunjAY1vmFr6VMlD6D1Q_iTKngNzzHJuAoToxWSfFKNMJhTmEdwSMdq3_VakYz-IAt_uyUJfMGaxzlDbktrS6CqN/s1600/Enable-Developer-Options-on-Android-4.2.png" width="400" /></a><span style="color: #6aa84f;"></span></h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;"></span> </h2><h2><span style="color: #6aa84f;">How to enable Developer Options:</span></h2><ol><li><span style="color: #0b5394; font-size: large;">Open the App drawer.</span></li><li><span style="color: #0b5394; font-size: large;">Launch Settings menu.</span></li><li><span style="color: #0b5394; font-size: large;">Find the open the ‘About Device’ menu.</span></li><li><span style="color: #0b5394; font-size: large;">Scroll down to ‘Build Number’.</span></li><li><span style="color: #0b5394; font-size: large;">Next, tap on the ‘build number’ section seven times.</span></li><li><span style="color: #0b5394; font-size: large;">After the seventh tap you will be told that you are now a developer.</span></li><li><span style="color: #0b5394; font-size: large;">Go back to Settings menu and the Developer Options menu will now be displayed.</span></li></ol><span style="font-size: large;">In order to enable the USB Debugging you will simply need to open Developer Options, scroll down and tick the box that says ‘USB Debugging’. That’s it.</span> How to enable Developer Options on Android 4.x… Read more » 25 Sep 2014
HOW TO CREATE AND SUBMIT A SITEMAP ON BLOGGER <div dir="ltr" style="text-align: left;" trbidi="on"><br /><header class="entry-header" style="box-sizing: border-box; font-family: Lato, 'open sans', 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 16px; line-height: 26px; text-align: justify;"><div class="separator" style="clear: both; color: #666666; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg36d4tlc_7KpB5qcC-21SyVUCiyH3X5sVmd2C39M8xn36cvqp_8Z8dEWUNP4qYOW00wS-mAsi0SiGpo0LSctkxuNcd4_ZXCPI6icJbSAJ0NvlPLR-8vei-vW0IMpAmBhQ52MTbMIkTzQ0W/s1600/create-and-submit-a-sitemap-on-blogger.png" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img border="0" height="368" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg36d4tlc_7KpB5qcC-21SyVUCiyH3X5sVmd2C39M8xn36cvqp_8Z8dEWUNP4qYOW00wS-mAsi0SiGpo0LSctkxuNcd4_ZXCPI6icJbSAJ0NvlPLR-8vei-vW0IMpAmBhQ52MTbMIkTzQ0W/s1600/create-and-submit-a-sitemap-on-blogger.png" width="640" /></a></div><h1 class="entry-title" itemprop="headline" style="border-bottom-color: rgb(245, 245, 245); border-bottom-style: solid; border-bottom-width: 2px; box-sizing: border-box; color: #333333; font-family: Lato, 'open sans', sans-serif; font-size: 1.6rem; font-weight: 300; letter-spacing: 2px; line-height: 1; margin: 0.5em 0px 1.4rem; padding: 0px 0px 10px; text-align: left; text-transform: uppercase;"><span style="font-size: 2rem; line-height: 1.2; text-align: justify;"><br /></span></h1><h1 class="entry-title" itemprop="headline" style="border-bottom-color: rgb(245, 245, 245); border-bottom-style: solid; border-bottom-width: 2px; box-sizing: border-box; font-family: Lato, 'open sans', sans-serif; font-size: 1.6rem; font-weight: 300; letter-spacing: 2px; line-height: 1; margin: 0.5em 0px 1.4rem; padding: 0px 0px 10px; text-align: left; text-transform: uppercase;"><span style="font-size: 2rem; line-height: 1.2; text-align: justify;"><span style="color: #3d85c6;">WHAT IS A SITEMAP</span></span></h1></header><br /><div class="entry-content" itemprop="text" style="box-sizing: border-box; font-family: Lato, 'open sans', 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 16px; line-height: 26px; text-align: justify;"><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">A sitemap is simply a directory of all the pages existing on your site, like a table of contents showing the structure of your blog. Sitemaps help search engines crawl your site and index it properly. Search engines will crawl your site if you have a sitemap or not, but this makes the process easier and quicker for them.</div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Bloggers default XML sitemap only shows recent blog posts – which is about 26 posts. We want search engine spiders to know your blogs structure so that they can easily understand and index it.</div><h2 style="box-sizing: border-box; font-family: Lato, 'open sans', sans-serif; font-size: 2rem; font-weight: 300; line-height: 1.2; margin: 0px 0px 1.4rem; text-transform: uppercase;"><span style="color: #3d85c6;">HOW TO CREATE A SITEMAP FOR BLOGGER</span></h2><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Creating a site map on Blogger is easy, simply add your blog name to the link below.</div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Blogger – Default URL<br /><code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">http://blogname.blogspot.com/atom.xml?redirect=false&start-index=1&max-results=500</code></div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Blogger – Custom URL<br /><code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">http://blogname.com/atom.xml?redirect=false&start-index=1&max-results=500</code></div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">A single sitemap file should not be exceed 50MB which is why we limit it to max results 500. You may need to edit this depending on how big your feed is. Now we’ve to tell search engines that this is your site map. To do this, we add it to your <span class="skimlinks-unlinked" style="box-sizing: border-box;">robots.txt</span> file and submit it to Google Webmaster Tools.</div><h3 style="box-sizing: border-box; color: #ee6492; font-family: Lato, 'open sans', sans-serif; font-size: 1.8rem; font-weight: 300; line-height: 1.2; margin: 0px 0px 1.4rem; text-transform: uppercase;">ADD BLOGGER SITEMAP TO ROBOTS.TXT FILE</h3><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Go to Blogger > Dashboard > Settings > Search Preferences and click edit the custom <span class="skimlinks-unlinked" style="box-sizing: border-box;">robots.txt</span> file. Click enable and paste the following adding your blogname.</div><pre style="background-attachment: initial; background-clip: initial; background-color: #eeeeee; background-image: initial; background-origin: initial; background-position: initial; background-repeat: initial; background-size: initial; border: 1px solid rgb(204, 204, 204); box-sizing: border-box; color: #666666; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 1.2rem; line-height: 1.714285714; margin-bottom: 1.714285714rem; margin-top: 1.714285714rem; padding: 1.714285714rem; white-space: pre-wrap; word-wrap: break-word;"><code style="box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">User-agent: *<br />Disallow: /search<br />Allow: /<br /> <br />Sitemap: http://blogname.blogspot.com/atom.xml?redirect=false&start-index=1&max-results=500 </code></pre><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">The above section means that search engines can index your entire site (<code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">Allow: /</code>) apart from your blogs search results (<code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">Disallow: /search</code>) which is good because that would be considered duplicate pages.</div><h3 style="box-sizing: border-box; color: #ee6492; font-family: Lato, 'open sans', sans-serif; font-size: 1.8rem; font-weight: 300; line-height: 1.2; margin: 0px 0px 1.4rem; text-transform: uppercase;">ADDING SITE MAP TO GOOGLE WEBMASTER TOOLS</h3><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Now login to <a href="http://www.google.com/webmasters/" sl-processed="1" style="-webkit-transition: all 0.1s ease-in-out; border-bottom-color: rgb(221, 221, 221); border-bottom-style: solid; border-bottom-width: 0px; box-sizing: border-box; color: #2db6c0; text-decoration: none; transition: all 0.1s ease-in-out;" target="_blank" title="google webmaster tools">Google Webmaster Tools</a> and select your blog. On the left click Crawl > Sitemaps > Add/Test Sitemap. You’ll see your blog name and a text input box, paste <code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">atom.xml?redirect=false&start-index=1&max-results=500</code>, test for errors and submit.</div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;"><img alt="submit-sitemap-to-google" class="aligncenter size-full wp-image-3253 frizzly-group-3246" height="160" src="http://i1.wp.com/xomisse.com/wp-content/uploads/2013/11/submit-sitemap-to-google.png?resize=394%2C160" style="border: 0px; box-sizing: border-box; display: block; height: auto; margin: 0px auto 2.4rem; max-width: 100%; width: auto;" width="394" /></div><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">Google will now start to crawl and index your site. You can check what pages have been indexed on Googles Webmaster Tools or by going to Google Search and typing “site:<span class="skimlinks-unlinked" style="box-sizing: border-box;">www.BLOG-URL.blogspot.com</span>”, “site:<span class="skimlinks-unlinked" style="box-sizing: border-box;">BLOG-URL.blogspot.com</span>”, “site:<span class="skimlinks-unlinked" style="box-sizing: border-box;">www.BLOG-URL.com</span>” or “site:<span class="skimlinks-unlinked" style="box-sizing: border-box;">BLOG-URL.com</span>”. To submit your sitemap to Bing, login to <a href="http://www.bing.com/toolbox/webmaster/" sl-processed="1" style="-webkit-transition: all 0.1s ease-in-out; border-bottom-color: rgb(221, 221, 221); border-bottom-style: solid; border-bottom-width: 0px; box-sizing: border-box; color: #2db6c0; text-decoration: none; transition: all 0.1s ease-in-out;" target="_blank" title="bing webmaster">Bings Webmaster Tools</a>, add your URL, verify ownership and then submit your site map. It may take a few days for your site to be indexed.</div><h2 style="box-sizing: border-box; color: #333333; font-family: Lato, 'open sans', sans-serif; font-size: 2rem; font-weight: 300; line-height: 1.2; margin: 0px 0px 1.4rem; text-transform: uppercase;">HAVE MORE THAN 500 POSTS?</h2><div style="box-sizing: border-box; color: #666666; margin-bottom: 2.6rem; padding: 0px;">If you have more than 500 posts on your blog, you simply submit another sitemap starting at post number 501 for the next 500 posts like so <code style="background-color: #eeeeee; box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">/atom.xml?redirect=false&start-index=501&max-results=500</code>and continue this depending on the amount of posts you have. So if I had over 1000 posts, my<span class="skimlinks-unlinked" style="box-sizing: border-box;">robots.text</span> file would look like this and I would submit the three separate sitemaps to Googles Webmaster Tool.</div><pre style="background-attachment: initial; background-clip: initial; background-color: #eeeeee; background-image: initial; background-origin: initial; background-position: initial; background-repeat: initial; background-size: initial; border: 1px solid rgb(204, 204, 204); box-sizing: border-box; color: #666666; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 1.2rem; line-height: 1.714285714; margin-bottom: 1.714285714rem; margin-top: 1.714285714rem; padding: 1.714285714rem; white-space: pre-wrap; word-wrap: break-word;"><code style="box-sizing: border-box; font-family: Consolas, Monaco, 'Lucida Console', monospace; font-size: 12px; line-height: normal;">User-agent: *<br />Disallow: /search<br />Allow: /<br /> <br />Sitemap: http://blogname.blogspot.com/atom.xml?redirect=false&start-index=<span class="pink" style="box-sizing: border-box; color: #ee6492;">1</span>&max-results=500<br />Sitemap:http://blogname.blogspot.com/atom.xml?redirect=false&start-index=<span class="pink" style="box-sizing: border-box; color: #ee6492;">501</span>&max-results=500<br />Sitemap:http://blogname.blogspot.com/atom.xml?redirect=false&start-index=<span class="pink" style="box-sizing: border-box; color: #ee6492;">1001</span>&max-results=500</code></pre></div><br /><section style="background: rgb(248, 248, 248); border: 0px; font-family: 'Open Sans', Helvetica, Arial, sans-serif; font-size: 13px; line-height: 16.0029983520508px; margin: 0px; outline: 0px; padding: 0px; vertical-align: baseline;"><div style="background: transparent; border: 0px; font-size: 15px; line-height: 22px; margin-bottom: 15px; margin-top: 15px; outline: 0px; padding: 0px; text-align: justify; vertical-align: baseline; word-wrap: break-word;"><div class="ijonkztabs"><div data-tab="Custom Roms"><ul style="background-color: #f9f9f9; border: 0px; box-sizing: border-box; color: black; font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: medium; line-height: 16px; list-style: none; margin: 0px 0px 0px 30px; padding: 0px; text-align: start; vertical-align: baseline;"></ul></div></div></div></section></div> HOW TO CREATE AND SUBMIT A SITEMAP ON BLOGGER… Read more » 21 Sep 2014
.jpg)
